News

Replacing a Hose Versus Replacing the Kit: A Practical Rule
2026-10-13
Replacing only the part that failed is right about half the time. This article sets out a practical rule: replace the failed part, inspect everything sharing its environment, and let condition decide whether the whole loop or kit should be renewed.
Reading a Product Listing Here: Chassis Codes, Generations and Year Ranges
2026-10-13
Model names are not specifications. This guide explains how to read our listings: chassis and generation codes as the primary filter, engine codes as the second, year ranges as production markers, and how to cross-check before ordering.
Carbon Fibre Intake Tubes: What a Dry Carbon Tube Changes
2026-10-13
A dry carbon intake tube replaces a ribbed plastic part with a smooth, heat-resistant bore. This article explains how dry carbon is built, what changes in the intake path, how fitment is decided, and when carbon is the wrong material.
Yamaha FX-SVHO: Custom Intercooler and Blow-Off Valve Work
2026-10-13
On a modified FX-SVHO, charge cooling and boost control have to be planned together. This article covers core choice for a watercraft hull, salt water materials, pipework and joint detail, flushing maintenance, and fabricated replacement parts.
Ski-Doo 900 ACE Turbo: Intercooler and Charge Hose Notes
2026-10-13
Turbocharged snowmobiles ask hoses to stay flexible in deep cold and hold shape in engine-bay heat. This article covers reading the charge path, abrasion and ice damage, heat shielding, and how a replacement cooler or hose is specified.
Jet Ski and PWC Intercoolers: Kawasaki Ultra and Sea-Doo Notes
2026-10-13
A personal watercraft intercooler is a wear part in a harsh environment. This article covers water-side deposits, how a tired core shows up under sustained load, core-only versus full replacement, and specifying a core for salt or fresh water.
Kia Stinger and Genesis G70 3.3L V6: Dual-Intake Silicone Turbo Inlets
2026-10-13
Plastic turbo inlets harden and neck down over time on the 3.3-litre V6. This article explains why the two sides must be replaced as a matched pair, how reinforcement keeps the bore open, and what to check before ordering inlets.
Ford Focus ST 2.0L EcoBoost 2013-2018: Front-Mount Intercooler Notes
2026-10-13
A front-mount intercooler changes how consistently a Focus ST holds charge temperature. This piece covers core sizing for road use, charge pipe diameter, bracket and hose detail, fitting the 2013 to 2018 car, and what actually changes on the road.
Page 26 of 33
Total 33 Pages
Go To