News

Mandrel Bending Versus Crush Bending: What Each Does to Flow
2026-10-13
How mandrel bending and crush bending form a tube, what each leaves behind in the cross-section, how to check a finished bend, and which process suits titanium and stainless exhaust work.
Preparing Titanium for Welding: Cleaning and Handling Before the Arc
2026-10-13
Titanium absorbs anything left on its surface, so preparation decides the weld. Residue from cutting and machining, brush and solvent order, handling and cleaning between passes.
Welding Stainless Thin-Wall Tube Without Sugaring the Inside
2026-10-13
Thin-wall stainless keeps the root hot long enough to oxidise. Reducing heat, fitting joints tightly, purging for longer and confirming the inside with a light and a mirror.
How Weld Quality Is Checked Before a Part Ships
2026-10-13
Inspection starts before measurement. What a visual check covers, how dimensions and the inside of a joint are verified, and why the check belongs to someone who did not weld the part.
Distortion Control When Welding Thin-Wall Exhaust Tube
2026-10-13
Thin-wall tube bows and flanges pull because heat expands restrained metal. Tack sequence, back-stepping, fixtures and cooling all decide whether a part still fits after welding.
Filler Wire Choice for Titanium Exhaust Work
2026-10-13
Titanium filler has to match the parent metal, not add strength for its own sake. Matching pure and alloyed tube, sizing wire to wall thickness and keeping a build consistent.
Weld Purging for Stainless: When Argon Inside Is Not Optional
2026-10-13
On stainless, a hot root exposed to air turns to brittle black oxide. When purging is genuinely required, how to arrange it, and how to judge the inside of a finished joint.
TIG Welding Aluminium Intercoolers and Tanks: What Changes
2026-10-13
Aluminium welds without a colour warning, carries an oxide skin and moves heat fast. How those three traits change the way intercoolers and tanks are welded and checked.
Page 30 of 36
Total 36 Pages
Go To