News

Mirror Welding Stainless Steel: Where It Belongs and Where It Does Not
2026-10-13
Mirror welding is an appearance standard rather than a separate process. Where a show-quality stainless bead earns its cost, where it is the wrong call, and how heat input decides the result.
Heat Tint on Titanium: What the Colours Tell You About a Weld
2026-10-13
Heat tint on titanium is a thin oxide film, and its colour records both temperature and shielding. What silver, straw, purple, blue and grey actually mean on a finished weld.
Argon Back-Purge: Why the Inside of a Titanium Weld Matters
2026-10-13
Titanium absorbs oxygen on the back side of a weld, so the inside of a joint needs its own shielding gas. How an argon back-purge is set up, held and read on tube work.
Titanium Fabrication: Why It Cannot Be Treated Like Stainless
2026-10-13
Titanium reacts with air at welding temperature and work-hardens differently from stainless. This explains what has to change in cleaning, heat input, tooling and shielding.
Titanium Versus Aluminised Steel Pipe: The Cost Argument in Full
2026-10-13
Aluminised steel is cheap and often adequate while titanium is expensive and long-lived. This compares the two on service life, heat, weight and the total cost of ownership.
Titanium Exhaust Heat: What It Does to Nearby Components
2026-10-13
Exhaust heat reaches nearby parts by radiation and conduction. This looks at what suffers first, what titanium does and does not change, and how blankets and shields are chosen.
Titanium Exhaust Weight: Where the Saving Actually Comes From
2026-10-13
Titanium saves mass mainly through thinner walls and lighter flanges, hangers and brackets. This breaks down where the saving really comes from and where the argument is weakest.
Titanium Exhaust Repair: What Can and Cannot Be Welded Again
2026-10-13
Cracks in titanium exhaust parts usually start at joints and hangers. This covers what can be welded again, what cannot reasonably be saved, and how a splice should be prepared.
Page 31 of 36
Total 36 Pages
Go To